CI Systems ControlMaster SR-800R - Connecting Pipes and Dry Nitrogen to the Low-Temperature Blackbody

CI Systems SR-800R
8.4.2 Connecting Pipes and Dry Nitrogen to the Low-Temperature Blackbody
1. Remove the four Allen screws fastening the right-hand clamp and the left-hand
clamp to the blackbody and remove the clamp.
Figure 8-4: Connecting Pipes and Dry Nitrogen to the Low-Temperature Blackbody -
Removal of Pipe Clamps
Clamp-to-Blackbody
Fastening Allen Screw (x4)
605-7040 Operation Manual
Rev D 8-8
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com