CI Systems SR-800R
6.2.34 GETDIFFERENTIALSETPOINT
Summary: Use this command to display the current differential temperature set
point.
G E T D I F F E R E N T I A L S E T P O I N T
EOM
Input Operand: None
Return Values: The current differential temperature set point with 3-digit
resolution
6.2.35 SETCOMPUTERNAME
Summary: This command sets the computer name of the ControlMaster. It is used
to easily identify different ControlMasters in the system. It is like a nickname for
the unit.
S E T C O M P U T R N A M E
Space
StringName
EOM
Input Operand: StringName - This is the alphanumeric computer name to set.
The name should not be longer than 20 characters. It can include spaces. No
special characters are allowed, such as '\' or '*' or carriage return.
Return Values: None
605-7040 Operation Manual
Rev D 6-27
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...