CI Systems SR-800R
Preface
Scope of This Manual
This manual provides all the required information for installing, operating, and maintaining the
SR-800R Extended Area Blackbody ControlMaster. The manual is intended for use by operator-
level personnel.
Contents of This Manual
The manual includes the following chapters:
Chapter 1: Introduction & General Information
Serves as introduction to the SR-800R Extended Area Blackbody, providing the SR-800R
main features, general system technical data, and specifications.
Chapter 2 : Description
Provides a description of the structure and assemblies of the SR-800R. Operational
algorithm, based on a general block diagram, is also provided in this chapter.
Chapter 3 : Operation
Details the operating procedures of the SR-800R.
Chapter 4 : Handling & Installation
Provides general instructions for transporting, storing, unpacking, and installing the SR-
800R.
Chapter 5 : Maintenance
Provides safety and troubleshooting maintenance information, and step-by-step
instructions on how to perform preventive and scheduled maintenance tasks on the SR-
800R.
Chapter 6 : SR-800R Communication Protocol
Defines the communications protocol between the ControlMaster Blackbody and the
HOST.
Chapter 7 : Removable Sensors
Provides the removal and installation procedures for the Removable Emitter Sensor.
Chapter 8 : SR-800R Blackbody Refrigerated Circulator for LT Blackbody Option
Provides instructions for setting up, operating, handling and dismantling the circulation
system.
Chapter 9 : Operating the SR-800R via the Remote Control Program
Provides step-by-step instructions for using the SR-800R Remote Control program.
Appendix A: Calibration Methods
Introduce CI Systems’ Blackbodies calibration methodologies.
Index
Provides, in alphabetical order, a list of keywords to be found throughout this manual.
605-7040 Operation Manual
Rev D iii
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...