CI Systems SR-800R
2.3 Controls & Indicators
Table 2-1 depicts all controls and indicators used for operating the SR-800R
(see Figure 2-3).
Table 2-1: Controls & Indicators
No. Name Type/Function
1. Power Two-position green colored switch used to toggle ON/OFF power
supply to the SR-800R.
2. Soft-Touch Panel Soft-touch LCD colored panel used as the MMI of the SR-800R.
3. Brightness A linear potentiometer used to set the LCD screen brightness.
4. Carrying Handle Used when the SR-800R is functioning as a portable device.
Figure 2-3: Controls & Indicators
Power Soft-Touch Panel Brightness
Carrying Handle
605-7040 Operation Manual
Rev D 2-5
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...