CI Systems ControlMaster SR-800R - Calibratetouchpanel; Setremotetype

CI Systems SR-800R
6.2.41 CALIBRATETOUCHPANEL
 Summary: Use this command to recalibrate the Touch Panel.
C A L I B R A TETOUCHPAN E L
EOM
 Input Operand: None
 Return Values: None
6.2.42 SETREMOTETYPE
 Summary: Use this command to set the remote communications type between the
Host Computer and the ControlMaster.
 Note: After sending this command, wait at least 5 seconds and then reboot the
ControlMaster for the changes to take effect.
S E T R E M O T E T Y P E
Space
strRemoteType
EOM
 Input Operand: strRemoteType - Can be either 'Ethernet', 'GPIB' or 'RS232'
 Return Values: None
605-7040 Operation Manual
Rev D 6-32
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com