CI Systems ControlMaster SR-800R - Figure 3-34: Alphanumeric Keypad; Figure 3-35: Saving New Settings

CI Systems SR-800R
3. To Change/Edit The Target Name Definition:
a. Press the list box twice in succession (T1: PH in this example).
b. Use the Keypad to enter \ edit the target name:
Figure 3-34: Alphanumeric Keypad
c. Complete the action by pressing OK, or discard the changes by pressing
Cancel.
d. Press
to save the new settings.
Figure 3-35: Saving New Settings
605-7040 Operation Manual
Rev D 3-31
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com