CI Systems ControlMaster SR-800R - Figure 3-30: Motion Setup; Figure 3-31: Axis Setup

CI Systems SR-800R
The Options window includes:
 Motion Setup (see Section 3.2.3.6.1)
 Settings (see Section 3.2.3.6.2)
 Communications (see Section 3.2.3.6.3)
 Re-Store Factory (see Section 3.2.3.6.4)
 Touch Panel Calibration (see Section 3.2.3.6.5)
 Temperature (see Section 3.2.3.6.6)
3.2.3.6.1 Motion Setup
The Motion Setup window allows you to setup axis and target list, defined in a
target-wheel.
To open the Motion Setup window:
From the Options window press
. The following window opens:
Figure 3-30: Motion Setup
3.2.3.6.1.1 Axis Setup
1. Press . The following Axis Setup window opens:
Figure 3-31: Axis Setup
605-7040 Operation Manual
Rev D 3-28
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com