CI Systems ControlMaster SR-800R - Figure 3-26: MRTD Test Results Chart; Figure 3-27: MRTD Test Results Table

CI Systems SR-800R
5. Repeat steps 2 - 4 (up to 5 times). The MRTD is calculated using the following
equation:
()
(
)
(
)
2
Negative∆TPositive∆T
fMRTD
−
=
Upon completion, the following MRTD Test Results Chart is displayed:
Figure 3-26: MRTD Test Results Chart
6. You may press to view the MRTD Test results in a table format:
Figure 3-27: MRTD Test Results Table
7. You may stop running the MRTD test at any time by pressing .
To close and return to the last opened window (Figure 3-26) press
.
605-7040 Operation Manual
Rev D 3-26
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com