CI Systems ControlMaster SR-800R - Mode

CI Systems SR-800R
3.2.3.1 Mode
The Mode window allows you to change some default parameters of the
SR-800R Main window.
To open the Mode window:
1. From the Menu Window, press
. The following window opens:
Figure 3-14: Mode
2. Set the Working Mode:
a. To work in Absolute mode select the Absolute radio-button
(see Section 3.2.1: Absolute Mode Window).
b. To work in Differential mode select the Differential radio-button
(see Section 3.2.2: Differential Mode Window).
3. Set the temperature Scale (Kelvin or Celsius) that is to be displayed in the main
window (in either the Absolute or Differential modes):
a. To display the temperature measurements in Celsius,
select the Celsius radio-button.
b. To display the temperature measurements in Kelvin
select the Kelvin radio-button.
605-7040 Operation Manual
Rev D 3-14
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com