CI Systems ControlMaster SR-800R - Page 50

CI Systems SR-800R
4. Set the Radiometric Offset (active only in the Differential Mode; a compensation
of temperature deviations, resulting from ambient conditions:
NOTE
In addition, the Radiometric Offset is active only when the
selected target temperature offset value is Zero, see Section
3.2.3.6.1.2: Target Setup.
a. Select the On checkbox to enable the Radiometric Offset settings.
b. Set the offset by using the
up/down arrows (0.001° resolution) OR press
the Radiometric Offset numeric-edit field
to open the floating Keypad
and enter the required offset by pressing the desired number keys, and then
press
. The R letter is displayed in the main window, next to the ∆T
sign - .
To close and return to the last opened window (the Menu Window) press
. To
close and return to the Main window press .
605-7040 Operation Manual
Rev D 3-15
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com