CI Systems SR-800R
WARNING
The fuse is powered even when the SR-800R is OFF. Before
replacing the fuse, power-off the SR-800R and disconnect the
power cable from mains. Failure to comply may result in
injury to personnel and/or damage to equipment.
HOT SURFACE
The Blackbody may contain hot surfaces. Do not attempt to
touch the Blackbody surfaces during operation. If necessary,
use the Blackbody carrying handle. Failure to comply may
result in injury to personnel.
CAUTION
Power-off the SR-800R before disconnecting or replacing any
SR-800R cable. Failure to comply may result in damage to
equipment.
Always observe standard safety precautions during the installation, operation, and
maintenance of this product.
605-7040 Operation Manual
Rev D xv
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...