CI Systems SR-800R
4. Mount the right-hand pipes clamp and the left-hand pipes clamp and fasten to the
Blackbody using the four Allen screws (see Figure 8-7):
Figure 8-7: Connecting Pipes and Dry Nitrogen to the Low-Temperature Blackbody -
Fastening the Pipe Clamps
Clamp-to-Blackbody
Fastening Allen Screw (x4)
5. If needed, connect the Dry Nitrogen Source to the Blackbody Dry Nitrogen Inlet
(1 bar max).
605-7040 Operation Manual
Rev D 8-11
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...