CI Systems SR-800R
5. Select a target (to select a target from another axis/Target-Wheel,
see Section 3.2.3.6.2: Settings):
a. Press an AXIS button (or another axis button, if valid). The AXIS button
turns red and target selection is enabled.
To cancel press the AXIS button again.
b. Press
to select the required target (a blank field selection is acceptable,
e.g., the current target selection remains as is).
6. Press
to save your settings.
7. To set new or update an existing Preset No repeat steps 2 - 6 .
8. To clear the entire list settings press .
9. To close and return to the last opened window (the Menu Window) press
.
10. To close and return to the Main window press .
605-7040 Operation Manual
Rev D 3-17
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...