46-34
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL_28731-01
Chapter 46 Configuring 802.1X Port-Based Authentication
Configuring 802.1X Port-Based Authentication
HostMode = SINGLE_HOST
QuietPeriod = 60
ServerTimeout = 0
SuppTimeout = 30
ReAuthMax = 2
MaxReq = 2
TxPeriod = 30
Dot1x Authenticator Client List
-------------------------------
Supplicant = 0007.e95d.83c4
Session ID = 0A050B160000009505106398
Auth SM State = AUTHENTICATING
Auth BEND SM State = REQUEST
Port Status = UNAUTHORIZED
The following example illustrates when a port is authorized:
Switch# show authentication sessions int G4/5
Interface: GigabitEthernet4/5
MAC Address: 0015.e981.0531
IP Address: Unknown
User-Name: ctssxp
Status: Authz Success
Domain: DATA
Oper host mode: single-host
Oper control dir: both
Session timeout: N/A
Idle timeout: N/A
Common Session ID: 0A053F0F00000004041E6B0C
Acct Session ID: 0x00000021
Handle: 0x2C000004
Runnable methods list:
Method State
dot1x Authc Success
Switch# show dot1x interface G4/5 details
Dot1x Info for GigabitEthernet4/5
-----------------------------------
PAE = AUTHENTICATOR
PortControl = AUTO
ControlDirection = Both
HostMode = SINGLE_HOST
QuietPeriod = 60
ServerTimeout = 0
SuppTimeout = 30
ReAuthMax = 2
MaxReq = 2
TxPeriod = 30
Dot1x Authenticator Client List
-------------------------------
Supplicant = 0015.e981.0531
Session ID = 0A053F0F00000004041E6B0C
Auth SM State = AUTHENTICATED
Auth BEND SM State = IDLE
Port Status = AUTHORIZED
To Next Page
Loading...
