Cisco Catalyst 4500 Series Administration Guide

4-48
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
Chapter 4 Administering the Switch
Configuring Embedded CiscoView Support
Displaying Embedded CiscoView Information
To display the Embedded CiscoView information, enter the following commands:
The following example shows how to display the Embedded CiscoView file and version information:
Switch# show ciscoview package
File source:
CVFILE SIZE(in bytes)
------------------------------------------------
Cat4000IOS-5.1.sgz 1956591
Cat4000IOS-5.1_ace.html 7263
Cat4000IOS-5.1_error.html 410
Cat4000IOS-5.1_install.html 2743
Cat4000IOS-5.1_jks.jar 20450
Cat4000IOS-5.1_nos.jar 20782
applet.html 12388
cisco.x509 529
identitydb.obj 2523
Switch# show ciscoview version
Engine Version: 5.3.4 ADP Device: Cat4000IOS ADP Version: 5.1 ADK: 49
Switch#
Command Purpose
Switch# show ciscoview package
Displays information about the Embedded CiscoView files.
Switch# show ciscoview version
Displays the Embedded CiscoView version.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E