Cisco Catalyst 4500 Series Administration Guide

68-14
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL_28731-01
Chapter 68 Configuring Call Home
Displaying Call Home Configuration Information
Displaying Call Home Configuration Information
To display the configured Call Home information, perform these tasks:
Examples 68-1 to 68-7 show the results when using different options of the show call-home command.
Example 68-1 Configured Call Home Information
Switch# show call-home
call home feature : disable
call home message's from address: switch@example.com
call home message's reply-to address: support@example.com
vrf for call-home messages: Not yet set up
contact person's email address: technical@example.com
contact person's phone number: +1-408-555-1234
street address: 1234 Picaboo Street, Any city, Any state, 12345
customer ID: ExampleCorp
contract ID: X123456789
site ID: SantaClara
source ip address: Not yet set up
source interface: Not yet set up
Mail-server[1]: Address: smtp.example.com Priority: 1
Mail-server[2]: Address: 192.168.0.1 Priority: 2
Rate-limit: 20 message(s) per minute
Available alert groups:
Keyword State Description
------------------------ ------- -------------------------------
configuration Disable configuration info
diagnostic Disable diagnostic info
environment Disable environmental info
inventory Enable inventory info
syslog Disable syslog info
Profiles:
Profile Name: campus-noc
Profile Name: CiscoTAC-1
Switch#
Command Purpose
Switch# show call-home
Displays the Call Home configuration in summary.
Switch# show call-home detail
Displays the Call Home configuration in detail.
Switch# show call-home alert-group
Displays the available alert groups and their status.
Switch# show call-home mail-server status
Checks and displays the availability of the
configured e-mail server(s).
Switch# show call-home profile {all | name}
Displays the configuration of the specified
destination profile. Use the keyword all to display
the configuration of all destination profiles.
Switch# show call-home statistics
Displays the statistics of Call Home events.

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E