Cisco Catalyst 4500 Series Administration Guide

CHAPTER
68-1
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL_28731-01
68
Configuring Call Home
This chapter describes how to configure the Call Home feature in Catalyst 4500 Series Switch.
This chapter includes the following sections:
• About Call Home, page 68-2
• Obtaining Smart Call Home, page 68-2
• Configuring Call Home, page 68-3
• Configuring Contact Information, page 68-4
• Configuring Destination Profiles, page 68-5
• Subscribing to Alert Groups, page 68-6
• Configuring General E-Mail Options, page 68-9
• Enabling Call Home, page 68-10
• Testing Call Home Communications, page 68-10
• Configuring and Enabling Smart Call Home, page 68-13
• Displaying Call Home Configuration Information, page 68-14
• Call Home Default Settings, page 68-18
• Alert Group Trigger Events and Commands, page 68-18
• Message Contents, page 68-21
Note For complete syntax and usage information for the switch commands used in this chapter, see the Cisco
Catalyst 4500 Series Switch Command Reference and related publications at this location:
http://www.cisco.com/en/US/products/hw/switches/ps4324/index.html
If a command is not in the Catalyst 4500 Series Switch Command Reference, you can locate it in the
Cisco IOS library. See the Cisco IOS Command Reference and related publications at this location:
http://www.cisco.com/en/US/products/ps6350/index.html

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E