Cisco Catalyst 4500 Series - Onboard Failure Logging (OBFL)

To Next Page

To Previous Page

CHAPTER

62-1

Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E

OL_28731-01

Onboard Failure Logging (OBFL)

• Prerequisites for OBFL, page 62-1

• Restrictions for OBFL, page 62-2

• Information About OBFL, page 62-2

• Default Settings for OBFL, page 62-8

• Enabling OBFL, page 62-8

• Configuration Examples for OBFL, page 62-9

Note For complete syntax and usage information for the commands used in this chapter, see these

publications:

http://www.cisco.com/en/US/docs/ios/12_0s/feature/guide/12sobfl.html

Note For complete syntax and usage information for the switch commands used in this chapter, see the Cisco

Catalyst 4500 Series Switch Command Reference and related publications at this location:

http://www.cisco.com/en/US/products/hw/switches/ps4324/index.html

If a command is not in the Catalyst 4500 Series Switch Command Reference, you can locate it in the

Cisco IOS library. See the Catalyst 4500 Series Switch Cisco IOS Command Reference and related

publications at this location:

http://www.cisco.com/en/US/products/ps6350/index.html

Prerequisites for OBFL

None.

Other manuals for Cisco Catalyst 4500 Series