Cisco Catalyst 4500 Series Administration Guide

Contents
2
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
Quality of Service 1-9
Cisco Modular QoS Command-Line-Interface 1-9
Two-Rate Three-Color Policing 1-9
Resilient Ethernet Protocol 1-10
SmartPort Macros 1-10
Spanning Tree Protocol 1-10
Stateful Switchover 1-10
SVI Autostate 1-11
Unidirectional Link Detection 1-11
VLANs 1-11
Virtual Switching Systems 1-12
Virtual Switch System Client 1-12
Y.1731 (AIS and RDI) 1-12
Layer 3 Software Features 1-13
Bidirectional Forwarding Detection 1-14
Cisco Express Forwarding 1-14
Device Sensor 1-14
EIGRP Stub Routing 1-14
Enhanced Object Tracking 1-15
GLBP 1-15
Cisco IOS XE IP Application Services Features in Cisco IOS XE 3.1.0SG 1-15
HSRP 1-16
Cisco IOS XE IP Application Services: HSRP Features in Cisco IOS XE 3.1.0SG 1-16
SSO Aware HSRP 1-16
IP Routing Protocols 1-17
BGP 1-17
EIGRP 1-17
IS-IS 1-18
OSPF 1-18
RIP 1-19
In Service Software Upgrade 1-19
IPv6 1-19
Multicast Services 1-19
NSF with SSO 1-20
OSPF for Routed Access 1-21
Policy-Based Routing 1-21
Unicast Reverse Path Forwarding 1-22
Unidirectional Link Routing 1-22
VRF-lite 1-22
Virtual Router Redundancy Protocol 1-22

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E