Contents
12
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
Support for WS-X46490-CSFP-E on a 10-slot Chassis 8-17
Selecting the Uplink Port on a Supervisor Engine 7L-E 8-18
Single Supervisor Mode 8-18
Redundant Supervisor Mode 8-19
Digital Optical Monitoring Transceiver Support 8-19
Configuring Optional Interface Features 8-20
Configuring Ethernet Interface Speed and Duplex Mode 8-20
Speed and Duplex Mode Configuration Guidelines 8-20
Setting the Interface Speed 8-21
Setting the Interface Duplex Mode 8-22
Displaying the Interface Speed and Duplex Mode Configuration 8-22
Adding a Description for an Interface 8-23
Configuring Flow Control 8-23
Configuring Jumbo Frame Support 8-26
Ports and Modules That Support Jumbo Frames 8-26
Jumbo Frame Support 8-26
Configuring MTU Sizes 8-28
Interacting with Baby Giants 8-29
Configuring the Port Debounce Timer 8-29
Configuring Auto-MDIX on a Port 8-30
Displaying the Interface Auto-MDIX Configuration 8-32
Understanding Online Insertion and Removal 8-33
Online Insertion and Removal on a WS-4500X-32 8-33
Shutting down a Module 8-34
Booting a Module After if it has been Stopped 8-34
Common Scenarios 8-35
Monitoring and Maintaining the Interface 8-35
Monitoring Interface and Controller Status 8-36
Clearing and Resetting the Interface 8-36
Shutting Down and Restarting an Interface 8-37
Configuring Interface Link Status and Trunk Status Events 8-37
Configuring Link Status Event Notification for an Interface 8-38
Global Settings 8-38
Configuring a Switch Global Link Status Logging Event 8-38
Examples 8-38
Resetting the Interface to the Default Configuration 8-40
Checking Port Status and Connectivity 9-1
Checking Module Status 9-1
To Next Page
Loading...
