Cisco Catalyst 4500 Series Administration Guide

71-6
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL_28731-01
Chapter 71 Performing Diagnostics
Detailed Status
---------------
. = Pass U = Unknown
L = Loopback failure S = Stub failure
P = Port failure
E = SEEPROM failure G = GBIC integrity check failure
Ports 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
. . . . . . . . . . . . . . . .
Ports 17 18 19 20 21 22 23 24
___________________________________________________________________________
2) online-diag-tdr:
Port 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
----------------------------------------------------------------------------
U U . U U U U U U U U U U U U U U U U U U U U U
Error code ------------------> 0 (DIAG_SUCCESS)
Total run count -------------> 1
Last test testing type ------> OnDemand
Last test execution time ----> Jun 03 2009 05:39:00
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Jun 03 2009 05:39:00
Total failure count ---------> 0
Consecutive failure count ---> 0
Detailed Status
---------------
Interface Speed Local pair Cable length Remote channel Status
Gi6/3 1Gbps 1-2 N/A Unknown Terminated
3-6 N/A Unknown Terminated
4-5 N/A Unknown Terminated
7-8 N/A Unknown Terminated
___________________________________________________________________________
3) stub-rx-errors -------------------> .
Error code ------------------> 3 (DIAG_SUCCESS)
Total run count -------------> 4
Last test testing type ------> Health Monitoring
Last test execution time ----> Dec 20 2009 22:30:41
First test failure time -----> n/a
Last test failure time ------> n/a
Last test pass time ---------> Dec 20 2009 22:30:41
Total failure count ---------> 0
Consecutive failure count ---> 0
___________________________________________________________________________
4) supervisor-rx-trends ----------> .
Error code ------------------> 3 (DIAG_SUCCESS)
Total run count -------------> 4
Last test testing type ------> Health Monitoring
Last test execution time ----> Dec 20 2009 22:30:41
First test failure time -----> n/a

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E