Index
IN-17
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL_28731-01
ip igmp snooping tcn query solicit command 26-14
IP information
assigned
through DHCP-based autoconfiguration
3-2
ip load-sharing per-destination command 34-7
ip local policy route-map command 39-11
ip mask-reply command 9-13
IP MTU sizes,configuring 33-9
IP multicast
clearing table entries
36-28
configuring 36-13
default configuration 36-13
displaying PIM information 36-23
displaying the routing table information 36-24
enabling dense-mode PIM 36-15
enabling sparse-mode 36-15
features not supported 36-13
hardware forwarding 36-9
IGMP snooping and 26-5, 36-4
overview 36-1
routing protocols 36-2
software forwarding 36-9
See also Auto-RP; IGMP; PIM; RP; RPF
IP multicast routing
enabling
36-14
monitoring and maintaining 36-23
ip multicast-routing command 36-14
IP multicast traffic, load splitting 36-22
IP phones
configuring voice ports
42-3
See Cisco IP Phones 42-1
ip pim command 36-15
ip pim dense-mode command 36-15
ip pim sparse-dense-mode command 36-16
ip policy route-map command 39-8, 39-10
IP Port Security for Static Hosts
on a Layer 2 access port
51-25
on a PVLAN host port 51-28
overview 51-24
ip redirects command 9-13
IP routing tables
deleting entries
36-28
IP Service Level Agreements
See IP SLAs
IP service levels, analyzing
67-1
IP SLAs
benefits
67-2
CFM endpoint discovery 64-21
configuration guidelines 67-6
Control Protocol 67-4
default configuration 67-6
definition 67-1
ICMP echo operation 67-11
manually configuring CFM ping or jitter 64-19
measuring network performance 67-3
multioperations scheduling 67-5
operation 67-3
reachability tracking 58-9
responder
described
67-4
enabling 67-7
response time 67-4
scheduling 67-5
SNMP support 67-2
supported metrics 67-2
threshold monitoring 67-6
track state 58-9
UDP jitter operation 67-8
IP Source Guard
configuring
51-20
configuring on private VLANs 51-22
displaying 51-22, 51-23
overview 51-23
IP statistics
displaying
34-8
IP traceroute
executing
9-9
overview 9-8