Index
IN-42
Catalyst 4500 Series Switch Cisco IOS Software Configuration Guide
OL_28731-01
configuring 28-11
configuring on a trunk port 28-11
default 28-9
described 1-2, 28-7
selective QinQ 28-8
selective Q-in-Q, configuring 28-12
traditional QinQ 28-8
traditional Q-in-Q, configuring 28-12
types of 28-8
VLAN maps
applying to a VLAN
52-21
configuration example 52-22
configuration guidelines 52-18
configuring 52-17
creating and deleting entries 52-19
defined 1-41
denying access example 52-23
denying packets 52-19
displaying 52-24
order of entries 52-18
permitting packets 52-19
router ACLs and 52-25
using (figure) 52-5
using in your network 52-22
VLAN maps, PACL and Router ACLs 52-32
VLANs
allowed on trunk
18-5
configuration guidelines 16-3
configuring 16-5
configuring as Layer 3 interfaces 33-7
customer numbering in service-provider
networks
28-3
default configuration 16-4
description 1-11
extended range 16-3
IDs (default) 16-5
interface assignment 16-7
limiting source traffic with RSPAN 56-23
monitoring with RSPAN 56-21
name (default) 16-5
normal range 16-3
overview 16-1
reserved range 16-3
See also PVLANs
VLAN Trunking Protocol
See VTP
VLAN trunks
overview
18-3
VLAN User Distribution, configuring 802.1X 45-68
VMPS
configuration file example
16-32
configuring dynamic access ports on client 16-25
configuring retry interval 16-27
database configuration file 16-32
dynamic port membership
example
16-29
reconfirming 16-26
reconfirming assignments 16-26
reconfirming membership interval 16-26
server overview 16-21
VMPS client
administering and monitoring
16-27
configure switch
configure reconfirmation interval
16-26
dynamic ports 16-25
entering IP VMPS address 16-24
reconfirmation interval 16-27
reconfirm VLAM membership 16-26
default configuration 16-24
dynamic VLAN membership overview 16-23
troubleshooting dynamic port VLAN
membership
16-28
VMPS server
fall-back VLAN
16-22
illegal VMPS client requests 16-23
overview 16-21
security modes
multiple
16-22
To Next Page
Loading...
