Cisco Catalyst 4500 Series - Page 23

Contents
23
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
Configuring the LACP System Priority and System ID 25-13
Configuring EtherChannel Load Balancing 25-14
Removing an Interface from an EtherChannel 25-15
Removing an EtherChannel 25-15
Displaying EtherChannel to a Virtual Switch System 25-16
Understanding VSS Client 25-16
Virtual Switch System 25-16
Dual-Active Scenarios 25-16
Dual-Active Detection Using Enhanced PAgP 25-16
Displaying EtherChannel Links to VSS 25-18
Understanding Link-State Tracking 25-18
Configuring Link-State Tracking 25-21
Default Link-State Tracking Configuration 25-21
Link-State Tracking Configuration Guidelines 25-21
Configuring Link-State Tracking 25-21
Displaying Link-State Tracking Status 25-22
Configuring IGMP Snooping and Filtering,
and MVR
26-1
About IGMP Snooping 26-2
Immediate-Leave Processing 26-3
IGMP Configurable-Leave Timer 26-4
IGMP Snooping Querier 26-4
Explicit Host Tracking 26-4
Configuring IGMP Snooping 26-5
Default IGMP Snooping Configuration 26-5
Enabling IGMP Snooping Globally 26-6
Enabling IGMP Snooping on a VLAN 26-6
Configuring Learning Methods 26-7
Configuring PIM/DVMRP Learning 26-7
Configuring CGMP Learning 26-7
Configuring a Static Connection to a Multicast Router 26-8
Enabling IGMP Immediate-Leave Processing 26-8
Configuring the IGMP Leave Timer 26-9
Configuring IGMP Snooping Querier 26-10
Configuring Explicit Host Tracking 26-11
Configuring a Host Statically 26-11
Suppressing Multicast Flooding 26-12
IGMP Snooping Interface Configuration 26-12
IGMP Snooping Switch Configuration 26-13