Cisco Catalyst 4500 Series Administration Guide

Contents
29
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
Hardware and Software Forwarding 36-9
Non-Reverse Path Forwarding Traffic 36-10
Multicast Fast Drop 36-11
Multicast Forwarding Information Base 36-12
S/M, 224/4 36-13
Multicast HA 36-13
Configuring IP Multicast Routing 36-13
Default Configuration in IP Multicast Routing 36-13
Enabling IP Multicast Routing 36-14
Enabling PIM on an Interface 36-14
Enabling Dense Mode 36-15
Enabling Sparse Mode 36-15
Enabling Sparse-Dense Mode 36-15
Enabling Bidirectional Mode 36-16
Enabling PIM-SSM Mapping 36-17
Configuring a Rendezvous Point 36-17
Configuring Auto-RP 36-17
Configuring a Single Static RP 36-20
Load Splitting of IP Multicast Traffic 36-22
Monitoring and Maintaining IP Multicast Routing 36-23
Displaying System and Network Statistics 36-23
Displaying the Multicast Routing Table 36-24
Displaying IP MFIB 36-26
Displaying Bidirectional PIM Information 36-27
Displaying PIM Statistics 36-27
Clearing Tables and Databases 36-28
Configuration Examples 36-28
PIM Dense Mode Example 36-28
PIM Sparse Mode Example 36-29
Bidirectional PIM Mode Example 36-29
Sparse Mode with a Single Static RP Example 36-29
Sparse Mode with Auto-RP: Example 36-30
Configuring ANCP Client 37-1
About ANCP Client 37-1
Enabling and Configuring ANCP Client 37-2
Identifying a Port with the ANCP Protocol 37-2
Example 1 37-3
Example 2 37-4
Identifying a Port with DHCP Option 82 37-4

Cisco Catalyst 4500 Series Specifications

General

Series	Catalyst 4500 Series
Category	Switch
Layer Support	Layer 2, Layer 3
Form Factor	Modular chassis
Stackable	No
Chassis Slots	3, 6, 7, 10
Power Supply Options	AC, DC
Redundancy	Power supply, Supervisor engine
Network Management	Cisco IOS Software CLI, SNMP, Cisco Prime Infrastructure
Features	Security, QoS
Port Density	Up to 384 ports per chassis
Security Features	802.1X, ACLs, DHCP Snooping, Dynamic ARP Inspection, IP Source Guard
Supervisor Engine	8-E