Contents
4
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
IP Source Guard 1-38
IP Source Guard for Static Hosts 1-38
IPv6 First Hop Security 1-38
Local Authentication, RADIUS, and TACACS+ Authentication 1-40
Network Admission Control 1-40
Network Security with ACLs 1-40
Port Security 1-41
PPPoE Intermediate Agent 1-41
Session Aware Networking 1-41
Storm Control 1-42
uRPF Strict Mode 1-42
Utilities 1-42
Layer 2 Traceroute 1-42
Time Domain Reflectometry 1-43
Debugging Features 1-43
Web-based Authentication 1-43
New and Modified IOS Software Features Supported in Cisco IOS 15.2(1)E and Cisco IOS XE 3.5.0E 1-44
Command-Line Interfaces 2-1
Accessing the Switch CLI 2-2
Accessing the CLI Using the EIA/TIA-232 Console Interface 2-2
Accessing the CLI Through Telnet 2-2
Performing Command-Line Processing 2-3
Performing History Substitution 2-4
About Cisco IOS Command Modes 2-4
Getting a List of Commands and Syntax 2-5
Virtual Console for Standby Supervisor Engine 2-6
ROMMON Command-Line Interface 2-7
Archiving Crashfiles Information 2-8
Displaying a Crash Dump for Supervisor Engine 6-E and 6L-E 2-8
Configuring the Switch for the First Time 3-1
Default Switch Configuration 3-1
Configuring DHCP-Based Autoconfiguration 3-2
About DHCP-Based Autoconfiguration 3-2
DHCP Client Request Process 3-3
Configuring the DHCP Server 3-4
Configuring the TFTP Server 3-4
Configuring the DNS Server 3-5