Contents
45
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
Configuring EtherType Matching 52-15
Configuring Named IPv6 ACLs 52-16
Applying IPv6 ACLs to Layer 2 and 3 Interface 52-17
Configuring VLAN Maps 52-17
VLAN Map Configuration Guidelines 52-18
Creating and Deleting VLAN Maps 52-19
Examples of ACLs and VLAN Maps 52-19
Applying a VLAN Map to a VLAN 52-21
Using VLAN Maps in Your Network 52-22
Denying Access to a Server on Another VLAN 52-23
Displaying VLAN Access Map Information 52-24
Using VLAN Maps with Router ACLs 52-25
Guidelines for Using Router ACLs and VLAN Maps on the Same VLAN 52-25
Examples of Router ACLs and VLAN Maps Applied to VLANs 52-25
ACLs and Switched Packets 52-25
ACLs and Routed Packets 52-26
Configuring PACLs 52-27
Creating a PACL 52-27
PACL Configuration Guidelines 52-28
Removing the Requirement for a Port ACL 52-28
Configuration Restrictions 52-29
Debugging Considerations 52-29
Webauth Fallback 52-29
Configuring IPv4, IPv6, and MAC ACLs on a Layer 2 Interface 52-29
Using PACL with Access-Group Mode 52-30
Configuring Access-group Mode on Layer 2 Interface 52-31
Applying ACLs to a Layer 2 Interface 52-31
Displaying an ACL Configuration on a Layer 2 Interface 52-32
Using PACL with VLAN Maps and Router ACLs 52-32
Configuring RA Guard 52-35
Introduction 52-35
Deployment 52-36
Configuring RA Guard 52-36
Examples 52-37
Usage Guidelines 52-38
Support for IPv6 53-1
Finding Feature Information 53-1
About IPv6 53-1
To Next Page
Loading...
