Cisco Catalyst 4500 Series - Page 48

Contents
48
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL-30933-01
Core System Filter 57-6
Capture Filter 57-7
Display Filter 57-7
Input and Output Classification 57-7
Actions 57-8
Storing Captured Packets to Buffer in Memory 57-8
Storing Captured Packets to a .pcap File 57-8
Decoding and Displaying Packets 57-9
Displaying Live Traffic 57-9
Displaying from the .pcap File 57-9
Storing and Displaying Packets 57-9
Activating and Deactivating Wireshark Capture Points 57-9
Wireshark Features used in Switches 57-10
Wireshark on VSS 57-11
How to Configure Wireshark 57-11
Default Wireshark Configuration 57-11
Defining, Modifying, or Deleting a Capture Point 57-12
Examples 57-13
Activating and Deactivating a Capture Point 57-13
Configuring Wireshark on VSS 57-14
Monitoring Wireshark 57-14
Configuration Examples for Wireshark 57-14
Example: Displaying a Brief Output from a .pcap File 57-14
Example: Displaying Detailed Output from a .pcap File 57-15
Example: Displaying a Hexadecimal Dump Output from a .pcap File 57-17
Example: Displaying Packets from a .pcap File with a Display Filter 57-18
Usage Examples for Wireshark 57-18
Example: Simple Capture and Display 57-18
Example: Simple Capture and Store 57-19
Example: Using Buffer Capture 57-20
Example: Capture Sessions 57-24
Example: Capture and Store in Lock-step Mode 57-28
Example: Simple Capture and Store in Lock-step with High-speed Mode 57-29
Example: Simple Capture and Store of Packets in Egress Direction 57-30
VSS Specific Examples 57-31
Example: Capturing and Storing in a file (Attachment Point in VSS Active Switch) 57-31
Example: Capturing and Storing in a File with Display (Attachment Point in VSS Active Switch) 57-32
Example: Capturing and Storing in a File (Attachment point in VSS Standby Switch) 57-32