Cisco Catalyst 4500 Series - Page 522

14-10
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL_28731-01
Chapter 14 Configuring Power over Ethernet
Displaying the PoE Consumed by a Module
----------------------- ---------------- ---------------- ----------
Switch# show power inline g1/1
Module 1 Inline Power Supply: Available:158(w) Used:128(w) Remaining:30(w)
Interface Admin Oper Power(Watts) Device Class
From PS To Device
--------- ------ ---------- ---------- ---------- ------------------- -----
Gi1/1 auto on 10.3 10.3 CNU Platform 3
Interface AdminPowerMax AdminConsumption
(Watts) (Watts)
---------- --------------- --------------------
Gi1/1 15.4 15.4
switch# show power inline g2/1
Chassis Inline Power Supply: Available:800(w) Used:138(w) Remaining:662(w)
Interface Admin Oper Power(Watts) Device Class
From PS To Device
--------- ------ ---------- ---------- ---------- ------------------- -----
Gi2/1 auto on 11.5 10.2 CNU Platform n/a
Interface AdminPowerMax AdminConsumption
(Watts) (Watts)
---------- --------------- --------------------
Gi2/1 15.4 15.4
Switch# show power inline module 1
Module 1 Inline Power Supply: Available:158(w) Used:128(w) Remaining:30(w)
Interface Admin Oper Power(Watts) Device Class
From PS To Device
--------- ------ ---------- ---------- ---------- ------------------- -----
Gi1/1 auto on 10.3 10.3 CNU Platform 3
Gi1/2 auto on 10.3 10.3 CNU Platform 3
Gi1/3 auto on 10.3 10.3 CNU Platform 3
Gi1/4 auto on 10.3 10.3 CNU Platform 3
Gi1/5 auto on 10.3 10.3 CNU Platform 3
Gi1/6 auto on 10.3 10.3 CNU Platform 3
Gi1/7 auto on 10.3 10.3 CNU Platform 3
Gi1/8 auto on 10.3 10.3 CNU Platform 3
Gi1/9 auto on 10.3 10.3 CNU Platform 3
Gi1/10 auto on 15.4 15.4 Cisco/Ieee PD 3
Gi1/11 auto on 10.3 10.3 CNU Platform 3
Gi1/12 auto on 10.3 10.3 CNU Platform 3
--------- ------ ---------- ---------- ---------- ------------------- -----
Totals: 12 on 128.2 128.2
switch#