31-8
Software Configuration Guide—Release IOS XE 3.6.0E and IOS 15.2(2)E
OL_28731-01
Chapter 31 Configuring LLDP, LLDP-MED, and Location Service
Configuring LLDP and LLDP-MED, and Location Service
This example shows how to enable LLDP on an interface:
Switch# configure terminal
Switch(config)# interface GigabitEthernet 1/1
Switch(config-if)# lldp transmit
Switch(config-if)# lldp receive
Switch(config-if)# end
Step 5
Switch(config)# end
Returns to privileged EXEC mode.
Step 6
Switch# copy running-config
startup-config
Saves your entries in the configuration file.
Command Purpose
To Next Page
Loading...
