Cisco D9887B User Manual

MPEG-2/MPEG-4 4:2:0 Decoder (1 Video, 2 Audio) Option
78-4043743-01 Rev A 123
Audio 2 PID
1 Use the Up and Down buttons to move the cursor to "Aud 2 PID," then press the
Enter button.
2 Use the Left and Right buttons to select the column to edit, then use the Up and
Down buttons to select the desired Audio PID in the stream, then press the Enter
button to save the PID.
Audio 2 Type
1 Use the Up and Down buttons to move the cursor to "Audio2 Typ," then press
the Enter button.
2 Use the Up and Down buttons to select the audio type ("Dolby AC3", "AAC
ADTS", "AAC LOAS", "Dolby D +", "MPEG 1", "MPEG 2") on the PID chosen
above, then press the Enter button.
Audio 3 PID
Note: This menu is only available if the unit is equipped with a second decoder in
Configuration 1.
1 Use the Up and Down buttons to move the cursor to "Aud 3 PID," then press the
Enter button.
2 Use the Left and Right buttons to select the column to edit, then use the Up and
Down buttons to select the desired Audio PID in the stream, then press the Enter
button to save the PID.

Cisco D9887B Specifications

General

Brand	Cisco
Model	D9887B
Category	Receiver
Language	English