Cisco D9887B - Page 157

MPEG-2 Decoder 4:2:2 with Genlock (1 Video, 4 Audio) Option
78-4043743-01 Rev A 133
Video
1 Use the Up and Down buttons to move the cursor to "Video PID," then press the
Enter button.
2 Use the Left and Right buttons to select the column to edit and use the Up and
Down buttons to set the PID, then press the Enter button to save the selection.
Audio 1 PID
1 Use the Up and Down buttons to move the cursor to "Aud 1 PID," then press the
Enter button.
2 Use the Left and Right buttons to select the column to edit and use the Up and
Down buttons to set the PID, then press the Enter button to save the selection.
Audio 2 PID
1 Use the Up and Down buttons to move the cursor to "Aud 2 PID," then press the
Enter button.
2 Use the Left and Right buttons to select the column to edit and use the Up and
Down buttons to set the PID, then press the Enter button to save the selection.
Audio 3 PID
1 Use the Up and Down buttons to move the cursor to "Aud 3 PID," then press the
Enter button.
2 Use the Left and Right buttons to select the column to edit and use the Up and
Down buttons to set the PID, then press the Enter button to save the selection.