Cisco D9887B User Manual

Chapter 4 Using the Front Panel to Configure the D9887B HDTV Modular Receiver
134 78-4043743-01 Rev A
Audio 4 PID
1 Use the Up and Down buttons to move the cursor to "Aud 4 PID," then press the
Enter button.
2 Use the Left and Right buttons to select the column to edit and use the Up and
Down buttons to set the PID, then press the Enter button to save the selection.
Priority Mode
This mode is generally used with two identical streams for redundancy.
Priority 1
1 Use the Up and Down buttons to move the cursor to "Priority 1," then press the
Enter button.
2 Use the Up and Down buttons to select either "Manual" or "List," then press the
Enter button to save the selection.
Note: In "List" mode, the D9887B receiver will only allow the Services to be
selected that are in the PMT. The "Manual" mode is shown.
Note: The "List" mode is only selectable when the input is receiving a PMT.
Service
1 Use the Up and Down buttons to move the cursor to "Service," then press the
Enter button.
2 Use the Left and Right buttons to select the column to edit and use the Up and
Down buttons to select the program, then press the Enter button to save the
selection.

Cisco D9887B Specifications

General

Brand	Cisco
Model	D9887B
Category	Receiver
Language	English