Select Format Setting
When in "Auto" mode, the unit will automatically pick the format which is closest to
the native format of the decoded video in the elementary stream. When in "Manual"
mode, the format may be selected from the list of available output formats listed
under "Video Format" below.
1 Use the Up and Down buttons to move the cursor to "Select Format," then press
the Enter button.
2 Use the Up and Down buttons to select either "Auto" or "Manual" mode, then
press the Enter button to save the selection.
Video Format
Note: This menu is only available if the "Select Format" option is set to "Manual."
1 Use the Up and Down button to move the cursor to "Format," then press the
Enter button.
2 Use the Up and Down buttons to select the desired output format, then press the
Enter button to save the selection.
To Next Page
Loading...
Need help?
General
