CDM-570A/570AL Satellite Modem with Optional Packet Processor
Revision 5
Ethernet-based Remote Product Management 7–5 MN-CDM570A
The following tables list the Alarms and Faults v1 traps / v2 notifications that the modem supports.
CDM-570A/570AL Alarms and Faults SNMPv1 traps:
CDM-570A/570AL Alarms and Faults SNMPv2 notifications:
1.3.6.1.4.1.6247.85.1.3.1.1
1.3.6.1.4.1.6247.85.1.3.1.2
1.3.6.1.4.1.6247.85.1.3.1.3
1.3.6.1.4.1.6247.85.1.3.1.4
The SNMP agent supports both SNMPv1 and SNMPv2c. The “Traps” file only
needs to be compiled if SNMPv1 traps are to be used.
7.2.4 MIB-II
The CDM-570A/570AL agent implements RFC 1213 (Request for Comment No. 1213,
Management Information Base for Network Management of TCP/IP-based Internets: MIB-II,
McCloughrie/ Rose, March 1991). This is known as “MIB-II” or “Public MIB support.” The agent
implements the following groups:
Address Translation Group
Implemented but depreciated in MIB-II
For detailed OID information please refer to the actual MIB file.
To Next Page
Loading...
