Comtech EF Data CDM-570AL - Satellite Modem > Monitor

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Revision 5
Optional Packet Processor - Serial/Telnet CLI Operation 9–56 MN-CDM570A
9.3.8.2 Satellite Modem > Monitor
Open the nested Monitor page from the Satellite Modem page.
Figure 9-40. Monitor
Selection
Hot Key
Description
Rx Parameters R
Review Rx Parameters: EbNo, Signal Level, Frequency Offset, BER, Bit
Errors, and Average BER.
Stored Events E
Review logged operational events (i.e., alarms).
See Section 9.3.8.2.1.
Link Statistics T
Review current operating link statistics.
See Section 9.3.8.2.2.
BUC Status B
Displays the BUC operational status when a Block Up Converter is
connected to a CDM-570AL (L-Band) Satellite Modem.
See Section 9.3.8.2.3.
LNB Status N
Displays the LNB operational status when a Low Noise Block Down
Converter is connected to a CDM-570AL (L-Band) Satellite Modem.
See Section 9.3.8.2.4.
CnC Monitor C
Displays the current Carrier-in-Carrier configuration and operational
information.
See Section 9.3.8.2.5.