CDM-570A/570AL Satellite Modem with Optional Packet Processor
Revision 5
RADIUS Client I–1 MN-CDM570A
Appendix I. RADIUS CLIENT
I.1 Overview
Ethernet-based remote monitor and control (M&C) of the CDM-570A/570AL Satellite Modem is
available through the CDM-570A/570AL HTTP (Web Server) Interface, SNMP, and through the
issuance of remote commands and queries via Telnet.
For CDM-570A/570AL Satellite Modems that are equipped with the Optional IP Packet
Processor, additional remote M&C access is available via the Telnet Command Line Interface
(CLI).
Remote Authentication Dial In User Service (RADIUS) is a networking protocol that provides
centralized access authentication, authorization, and management for CDM-570A/570AL Satellite
Modems.
I.1.1 RADIUS List of Supported RFCs (Requests for Comment)
RFC No. Description
2865
“Remote Authentication Dial In User Service (RADIUS)”
Rigby, C., Willens, S., Rubens, A., Simpson, W., June 2000
1334
“PPP Authentication Protocols”
Llloyd, B., Simpson, W.,October 1992
1994
“PPP Challenge Handshake Authentication Protocol (CHAP)”
Simpson, W., August 1996
2759
“Microsoft PPP CHAP Extensions, Version 2”
Zorn, G., January 2000
2548
“Microsoft Vendor-specific RADIUS Attributes”
Zorn, G., March 1999
To Next Page
Loading...
