Comtech EF Data CDM-570AL - Vipersat Configuration

CDM-570A/570AL Satellite Modem with Optional Packet Processor
Revision 5
Optional Packet Processor - Serial/Telnet CLI Operation 9–40 MN-CDM570A
9.3.7 Vipersat Configuration
VMS v3.x.x VIPERSAT Management System User Guide (CEFD P/N MN/22156)
This page displays only if the optional Vipersat feature is enabled.
Open the Vipersat Configuration page from the Main Menu.
Figure 9-27. Vipersat Configuration
Selection
Hot Key
Description
STDMA Mode
T
Used only when CDM-570A/570AL is used in a Vipersat
Management System (VMS).
See the VMS v3.x.x VIPERSAT Management System User Guide
(CEFD P/N MN/22156)for complete information.
Automatic Switching
A
Unit Role
R
Expansion Unit
E
Bandwidth Group ID
B
Unit Name
N
Multicast Management IP
Address
M
Multicast VMS Management IP
Address
V
Managing IP Address
I
Path Loss Data Multicast
(PLDM)
P
Dynamic Power Control Config
C
Set Home State Parameters
H