EasyManua.ls Logo

Comtech EF Data CDM-570AL - High-Performance Packet Processor Features; 10;100 Baset Ethernet Interface

Default Icon
682 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CDM-570L/570AL Satellite Modem with Optional Packet Processor
Revision 5
Optional High Performance Packet Processor D–9 MN-CDM570A
D.1.2 High-Performance Packet Processor Features
10/100BaseT Ethernet Interface
Network-Based Management:
o HTTP Interface for complete product management
o SNMP with public and private MIB
o Console Port interface for local network management
o Telnet interface for remote product M&C
o Remote software/firmware upgrade via FTP
o Configuration Backup and Restore via FTP
o Event Logging to Capture all Packet Processor Activity
o Detailed Statistics of IP traffic
Header Compression (Layer 2 only)
IGMP Support for Multicast
Static IP Routing for Unicast and Multicast
Managed Switch Mode with VLAN
Adaptive Coding and Modulation (ACM)
D.1.2.1 10/100 BaseT Ethernet Interface
In Router Mode operation, the 10/100BaseT Ethernet Interface is used for routing IP traffic to be
transmitted over the satellite or routed to another device on the local LAN. In Managed Switch
Mode, the Ethernet Interface is used to forward IP and non-IP traffic over the satellite. Local or
remote management of all CDM-570A/570AL-IP (w/Packet Processor-related functions) is also
available via Telnet, HTTP, or SNMP.

Table of Contents

Related product manuals