802.1x Commands 307
FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\CLI Folders\Dell Contax
CLI\files\802.1X.fm
DELL CONFIDENTIAL – PRELIMINARY 5/15/12 - FOR PROOF ONLY
Username The username representing the supplicant identity.
This field shows the username if the port control is
auto. If the port is Authorized, it displays the
username of the current user. If the port is
Unauthorized, it displays the last user authenticated
successfully.
Quiet period The number of seconds that the device remains in
the quiet state following a failed authentication
exchange (for example, the client provided an invalid
password).
Tx period The number of seconds that the device waits for a
response to an Extensible Authentication Protocol
(EAP) request/identity frame from the client before
resending the request.
Max req The maximum number of times that the device
sends an EAP request frame (assuming that no
response is received) to the client before restarting
the authentication process.
Supplicant timeout The number of seconds that the device waits for a
response to an EAP-request frame from the client
before resending the request.
Server timeout The number of seconds that the device waits for a
response from the authentication server before
resending the request.
Session Time The amount of time (HH:MM:SS) that the user is
logged in.
MAC address The supplicant MAC address.
Authentication Method The authentication method used to establish the
session.
Termination Cause The reason for the session termination.
State The current value of the Authenticator PAE state
machine and of the Backend state machine.
Authentication success The number of times the state machine received a
Success message from the Authentication Server.
Authentication fails The number of times the state machine received a
Failure message from the Authentication Server.
Field Description
To Next Page
Loading...
