Field Service Ver. 1.0 Aug. 2005 9. Utility/Counter Mode
121
bizhub 200/250/350Adjustment / Setting
D. Print Density
E. Default Finishing Mode
9.3.5 User’s Choice 5/6
A. Sort/Non-Sort Auto Change
B. Output Tray Settings
(1) Copier/Printer
Functions • To specify the default print density.
Use • To change the default print density.
Setting/
Procedure
• The default setting is “0”.
-2 -1 0 1 2
Functions
• To set the default finishing mode selected when the screen shifts to the initial one.
• The contents of the display vary depending on the types of finishing options mounted
on the machine.
Use • To change the default finishing mode selected when the screen shifts to the initial one.
Setting/
Procedure
• The default setting is “Non-Sort”.
“Non-Sort” Sort Group
Corner Staple 2 Staples
Functions
• To select whether to enable or disable the function that automatically switches between
[Sort] and [Non- Sort] according to the number of originals and the number of copy sets
to be made.
Use
• To set so as to enable the function that automatically switches between [Sort] and
[Non-Sort] according to the number of originals and the number of copy sets to be
made.
Setting/
Procedure
• The default setting is “ON”.
“ON” OFF
Functions
• To specify the output tray for copies and computer printouts when output options are
mounted on the copier.
• The screen that appears differs depending on the options that are mounted on the
copier.
Use • To change the output tray for copies and computer printouts.
Setting/
Procedure
<Printer>
• The default setting is “1”.
“1” 2 (3)
<Copies>
• The default setting is “2”; or “1” if the Mailbin Kin is mounted.
(“1”) “2” 3
* ( ): when the Mailbin Kit is mounted
To Next Page