9. Utility/Counter Mode Field Service Ver. 1.0 Aug. 2005
126
bizhub 200/250/350
Adjustment / Setting
9.4.6 Toner Supply
Functions
• To adjust the set toner-to-carrier level by providing an auxiliary supply of toner when a
low image density occurs due to a lowered toner-to-carrier ratio after large numbers of
copies have been made of originals having a high image density.
Use • To replenish the supply of toner in an auxiliary manner.
Setting/
Procedure
• Touch [Toner Supply] for the copier to detect the current toner density and, if the den-
sity is lower than the standard value, a toner-replenishing sequence, then a developer
agitation sequence are performed. If the toner density is detected to be higher than the
standard value, only a developer agitation sequence is performed.
To Next Page
Loading...
