Develop ineo 250 - Page 228

Field Service Ver. 1.0 Aug. 2005 11. Tech. Rep. Mode
189
bizhub 200/250/350Adjustment / Setting
<Auto-RX Check>
<Connection Timeout>
<APOP Authentication>
(3) TX Settings
<SMTP Server Address>
<SMTP Port Number>
<Connection Timeout>
Functions
• To set whether or not to use Auto-RX Check and the time interval for the POP3 server
used for CS Remote Care.
Use
• To select not to use Auto-RX Check.
• To change the time interval for Auto-RX Check.
Setting/
Procedure
• The default setting is “OFF”
“OFF” (1 to 120)
Functions • To set the timeout period for connection during reception.
Use • To change the timeout period for connection during reception.
Setting/
Procedure
• The default setting is “60 sec”
“60 sec” (30 to 300)
Functions • To set whether or not to enable APOP authentication during reception.
Use • To enable APOP authentication during reception.
Setting/
Procedure
• The default setting is “OFF”
ON “OFF”
Functions • To set the SMTP server address for transmission used for CS Remote Care.
Use
• To set the address of the SMTP Server.
• The SMTP server address can be set as an IP address or domain name.
Setting/
Procedure
<IP Address>
• IP address Version 4 format
[0 to 255] . [0 to 255] . [0 to 255] . [0 to 255]
<FQDN>
• Enter the domain name.
Functions • To set the SMTP port number for transmission used for CS Remote Care.
Use • To set the port number of the SMTP Server.
Setting/
Procedure
• The default setting is “25”
“25” (1 to 65535)
Functions • To set the timeout period for transmission.
Use • To change the timeout period for connection during transmission.
Setting/
Procedure
• The default setting is “60 sec”
“60 sec” (30 to 300)