Develop ineo 250 - Page 232

Field Service Ver. 1.0 Aug. 2005 11. Tech. Rep. Mode
193
bizhub 200/250/350Adjustment / Setting
B. For e-mail
0020 Timeout of Telegram Delivery
(At waiting mode of telegram delivery the
machine fails to receive the telegram in a given
time.)
• Try communication again.
0021 Telegram Size Over
(The machine receives the telegram whose size
exceeds the specification.)
• Contact responsible person of
KONICA MINOLTA.
0022 Transmitting Phase Response NG
(Transmitting phase response MSG is not appro-
priate.)
• Contact responsible person of
KONICA MINOLTA.
0023 Timeout of Transmitting Phase Response MSG
(Transmitting phase response MSG is timeout.)
• Contact responsible person of
KONICA MINOLTA.
0024 Event Data Acquisition Function Error
(Although the transmitting phase response MSG
is OK, the function for Data acquisition shows
“No event,”.)
• Contact responsible person of
KONICA MINOLTA.
0025 Timeout of Driver transmitting check MSG
(Transmitting check MSG from the driver task is
timeout.)
• Contact responsible person of
KONICA MINOLTA.
0026 Detection of Internal Contradiction
(Unknown event is detected. Condition value is
not correct or so on.)
• Contact responsible person of
KONICA MINOLTA.
0027 Transmission / Receiving collision
(Receiving is detecting during transmitting pro-
cessing)
• Try communication again.
Error code Error Solution
Error code Error Solution
0001 Connection timeout during transmission
• Check SMTP server on the
user side.
0***
Failure in transmission
***: SMTP response code (hexadecimal form)
• Check SMTP server on the
user side.
0003 Connection timeout during reception
• Check POP3 server on the
user side.
0005 Failure in reception
• Check POP3 server on the
user side.
1030
Machine ID mismatch
(Mail with a machine ID different from that of the
local machine has been received.)
• Check machine ID setting.
• Check machine ID setting on
the host side.
1050
Grammatical error
(Mail with undefined CS Remote Care command
portion (2 digits) has been received.)

1061
Rewrite disabled
(Mail requesting rewriting for data item that is dis-
abled for setting change has been received from
the host.)

1062
Rewrite disabled during copy cycle
(To return rewrite disabled during copy cycle to
the host)
• Have the host send another
rewrite request mail.