Develop ineo 250 - Page 254

Field Service Ver. 1.0 Aug. 2005 16. Mechanical adjustment
215
bizhub 200/250/350Adjustment / Setting
16.2.3 Adjustment of the Manual Bypass Take-up Mechanical Clutch
1. Remove the Manual Bypass Unit.
☞ 71
2. Remove the Manual Feed Tray Lift-
up Sensor (PC29) [1].
3. Remove the screw [2] and the Man-
ual Paper Feed Pick-up Solenoid
(SL3) [3].
4. Remove the C-clip [4], actuator [5],
C-ring [6], and washer [7]. Then,
remove the manual bypass take-up
mechanical clutch [8].
5. Disassemble the Manual Bypass
Take-up Mechanical Clutch.
6. Mount the torque limiter [10] to the
gear [9].
4040F2C646DA
[1]
4040F2C647DA
[2]
[3]
4040F2C648DA
[4]
[5]
[6]
[7]
[8]
4040F2C649DA
4040F2C650DA
[9]
[10]