Programming
Service Instructions 755 A/756 A - 00.0 - 02/2019 303
Information
If the seam pattern is straight, you only have to set the left seam secure-
ment. The setting for the right needle is adopted.
Set securement seam beginning right needle
Information
The settings in subitem Securement seam beginning right
needle are adopted automatically from the settings for the Securement
seam beginning left needle ( p. 302).
Set securement seam end left needle
 The display switches to Securement seam end left needle.
Fig. 286: Set securement seam end left needle
To Next Page
Loading...
Need help?
General
