Programming
Service Instructions 755 A/756 A - 00.0 - 02/2019 333
Process of transport clamp
 The display switches to Process of transport clamp.
Fig. 313: Process of transport clamp
To set the process of the transport clamp:
1. Press the desired button.
 The user interface for setting the desired item is displayed.
Symbols Meaning
Select process of transport clamp  p. 334
Select piping type  p. 335
Spread transport clamp  p. 336
Set transport clamp pressure
• Adjustment of the clamp to different materials (e. g. lining fabrics)
• 30 - 100 %
To Next Page
Loading...
Need help?
General
