DURKOPP ADLER 755 A

Programming
Service Instructions 755 A/756 A - 00.0 - 02/2019 341
Setting blowing mode
 The display switches to Blowing mode.
Fig. 319: Setting blowing mode
Symbols Meaning
Function off
1: Lower folder
2: Blowing ON at flap clamp + folding plate
1: Lower folder
2: Blowing ON at folding plate
3: Blowing ON at flap clamp
1: Lower folder
2: Blowing ON at flap clamp, blowing ON at folding plate for 10 mm
seam path
• Not active in 755 A and 756 A
1: Lower pickup folder, blowing ON at flap clamp + folding plate
• Not active in 755 A and 756 A
1: Blowing ON at flap clamp + folding plate
2: Lower folder
• Not active in 755 A and 756 A
1: Lower folder
2: Blowing ON at folding plate 180 mm + blowing ON at flap clamp
1: Blowing ON at flap clamp, blowing ON at folding plate for 180mm
seam path