Need help?Do you have a question about the Ecolab EcoAdd Series and is the answer not in the manual?
General| Brand | Ecolab |
|---|---|
| Model | EcoAdd Series |
| Category | Water Pump |
| Language | English |
Guidance on accessing and understanding the user manual, including download options and language relevance.
Contact information for manufacturer service, technical support, and return addresses.
Essential safety precautions for operating the metering station, including immediate shutdown procedures if unsafe.
Defines proper pump application, including limitations on media, environment, and use (industrial/commercial).
Details required PPE (gloves, eyewear, shoes) and emphasizes consulting the product data sheet for the metering medium.
Safety warnings and procedures for installation, maintenance, and repair work, emphasizing authorized personnel.
Overview of the pump's features, including buttons, modes, display, data exchange, inputs, and outputs.
Explains using the Ecolab EcoAPP for smartphone-based pump control and monitoring via Bluetooth.
Describes different pump head variants, defining their litre capacity and metering valve designs.
Essential safety instructions and general guidelines for installing and assembling the pump unit.
Covers hydraulic connections, including overflow, pressure retention, and multi-function valves.
Instructions and safety warnings for electrical connections, emphasizing qualified personnel.
Provides a detailed diagram and explanation of the terminal assignments for inputs and outputs.
Recommends activating the access code feature for pump security and parameter protection.
Explains how selecting different metering modes affects suction duration and metering output.
Explains how to select operating modes (Manual, Pulse, Current, Timer) to control pump operation.
Introduces the configuration menu, listing all settable system parameters for the pump.
Explains setting access codes for Administrator and Operator levels to secure pump operation.
Configuration for the empty signal function, determining how container changes are handled and acknowledged.
Configuration for Batch mode, enabling sequential dosing based on quantity or concentration, with priority over other modes.
Configuration for using an oval gear meter for metering control, monitoring, and setting the maximum metering phase.
Instructions for performing pump calibration to ensure accurate metering based on site conditions.
Guides on using USB sticks for importing and exporting pump configuration data.
Step-by-step guide for the initial setup and commissioning of the pump.
Instructions on how to select the operating language for the pump's menu interface.
Instructions for performing calibration during initial setup to adapt to site conditions.
Instructions on how to power the pump on and off using the touch-sensitive screen.
References the section detailing the necessary pump configuration before operation.
Step-by-step guide for setting or resetting the pump's metering capacity in liters.
Guidance on handling container changes, including auto and manual acknowledgement methods.
Instructions on how to confirm or acknowledge required pump servicing intervals.
Explains how to switch between different metering modes for optimal pump performance.
Provides common fault descriptions, causes, and remedies for operational issues.
A comprehensive table detailing error codes, their causes, and recommended actions, often involving customer service.
Explains how to put the pump into maintenance mode for simplified servicing procedures.
Details the recommended maintenance tasks and intervals for the pump.
Detailed instructions and diagrams for replacing key pump components like valves and cartridges.
Step-by-step guide for replacing the diaphragm and pump head, including tightening torques.
Information and conditions for returning pumps and parts for repair or service to the manufacturer.
Lists and identifies wearing parts sets for different pump capacities.
Details available spare parts modules, including control units and pump heads.
Explains the pump key structure used for identifying and ordering specific pump configurations and parts.
Provides key performance data, capacities, pressures, and environmental specifications for different pump types.
Crucial information on correct tightening torques for various pump components to ensure leak-tightness and integrity.
Graphical representations of pump performance (flow rate vs. back-pressure) across different modes.
Instructions for rotating the pump's control unit for site condition adjustments.
Step-by-step guide for adapting the pump's mounting from stand to wall configuration.
Instructions for installing a Bluetooth PCB to enable smartphone monitoring and control.
Procedures for repairing or replacing the pump's control unit, including Bluetooth PCB management.
Guides on creating configuration backups via USB and importing them to a new control unit.
Steps for safely taking the equipment out of operation, including electrical isolation and draining.
Guidelines for safely dismantling the pump components, emphasizing PPE and environmental regulations.
Instructions for the environmentally-friendly disposal of pump components and waste materials.
To Next Page
