9.5 Confirm the pump service
Provided that an access code has been set in the pump, the pump
servicing can only be done with the access authorisation
‘Administrator’ !
Symbol Description of service displays
Service info with blue background: No servicing required
Service info with orange background: Advance notice of a servicing
Service info with a red background: Servicing overdue
Fig. 87: Confirm the pump service
1. In order to confirm a service, click the‘Servicing symbol on the
’ operation screen
To enter the setting, press the displayed ‘Servicing symbol on the’
operation screen
2. This step can be skipped if there is no password query here.
If you have activated an [access code] , note the following:
Ä
Chapter 7.7.2 ‘Open the main menu with the access code
activated’ on page 74.
ð
The screen switches to the query for: ‘Pump service’.
3.
By pressing the Cancel button , the information screen that is displayed is closed
again.
ð
The service has not been reset, and the operation screen is displayed.
4.
By pressing the OK button
, the information screen that is displayed is closed
again, and the operation screen is displayed.
5. The operation screen now shows the new servicing time suitable to the material
pairing of the pump under
Ä
Chapter 7.10.11 ‘Service interval’ on page 112 .
Operation
145 417102276 Rev. 5-02.2020
To Next Page
Loading...
Need help?
General
